Posted by soldbybrock on June 21, 2017 at 19:59:32 from (96.44.122.176):
ok so 6 hours later me and my tractor mechanic are at a stand still .... granted he is a NH guy but has over 20 years of repairs under his belt and well I'm the daughter of a mechanic, but still a novice with a service manual and 6 years of haying and knotter troubles in the past that I have usually work through thanks to online videos and reading
anyhow here is the stumper: one knotter is not cutting the second string ... or maybe the second string isn't even getting in to the right place on the billhook to be cut (at cutting speed its hard to tell) ... then it goes and wraps up around the roller half the time on the billhook making a mess and can at times pop the roller out of the tension arm grove
when you stop the tractor to look, you have no string in the twine disk holder and two strings going from the front to the back and the knotter makes a knot out of one string and a frayed half cut from the second string
see photo ... and oddly sometimes it missed the second string completely and you get a single string knot ... that photo also attached
and yes the knife blade has been changed out and the scraper blade is tight
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.