Missed your reply, sorry. If only they were o-rings! They're 1&1/8" OD u-cup's with 7/8" ID, 1/8" thick, 1/8" tall. Had to find an industrial supplier to track them down for me. Minimum order is 15 at a buck a pop plus shipping. I need 12 anyway so I am not to upset about it. Fortunately, they're the only seals on the system. One on top, one on bottom. It's a single piece unit.
I'm replacing the hoses as well, and the elbows. They're iron and should be hydraulic rated. The threads are 3/4" NPT(national pipe thread) for hte outlets, but some have NPT to JIC adapters for the stabilizer legs, also sizing them down to 1/2". I'm going to go under to the hydro lines for the arms and see if the lines that go into them are 1/2" and not 3/4". I have problems lifting the tractor off the ground without assistance of the boom pushing down as well. I think it's flow related, hopefully I can fix that while it's apart.
Pressure washer cleaned the valve body up quite nicely. Razor cleaned the surfaces up as well. Didn't use any detergent to clean it, and used the 1750psi electric pressure washer as well.
Tractor supply has 3/4" x 60" NPT hoses for $35 a pop. They also have the hydraulic swivel elbows for $10 a pop. 6 hoses and 8 elbows. It's going to be a few hundred bucks, but do it right and it'll last me another 60+ years.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.