Posted by Bryce Frazier on March 19, 2014 at 16:26:37 from (67.142.182.22):
Alright, sooo, I got in the mail today a 23 page "book" about the Farmall Super C WITH FH. It shows many different pictures of the tractor, with different variations/options. It shows on the last page a way to use the FH Hydro Cylinder, as a remote hydro on a trailed implement (shows a disc).
So, my question is, it shows a swinging draw bar, on the two point draw bar setup, I assume there is a King Pin of sorts that the front of the drawbar hooks to under the tractor, just like on a tractor without Fast Hitch, and the drawbar simply swings back and forth on the FH Drawbar setup. But what I saw that intrigued it, is that the FH appears to be about half way up, or raised off of the ground, but the Hydro cylinder is on the disc, so how would you lock the FH in the middle position????
The reason I ask, is because I have a JD No. 5 mower, that with two little brackets (which I have) would bolt right onto the FH Drawbar, but I have to have an Aux Hydro Cylinder in order to lift/lower the mower. So I thought it would be cool to use the FH Set up.
If anyone out there has any ideas/pictures I would LOVE to hear it. I also have a part that I cant seem to figure out where it goes.... Bryce
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.