Posted by dave2 on October 30, 2012 at 13:53:25 from (79.240.156.143):
Looks like I'll put the oxy/cetyline on the back burner til I loosen up some, or find a set of tanks and a source within a reasonable distance to fill/swap them.
May be able to heist a set from where SWMBO works...
Anyway, while looking today, I ran across a couple welders that were reasonably priced........ and I'd get more out of a welder than the torches... Cut and weld instead of heat and bend........... For the thin stuff, would a wire feed or an inverter welder be the best bet?? Not a pro welder, but can get by with what jobs pop up.... Just not good at arc welding thin stuff with the AC welder..
Both the wire feed and the inverter claim a material range of .5 to 8mm, just don't know which is the most user friendly..
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.