Posted by wisbaker on July 07, 2012 at 22:26:54 from (207.118.175.96):
In Reply to: Stationary Motor posted by Brian In Texas on July 07, 2012 at 19:02:57:
There are several variations of automotive engines used for power units. If you can find a power unit it'll have a governor on it. Example when I worked at the rendering company in Florida we had a pump IIRC 6x4x12 that had a Ford 2.3 (Pinto) engine on it, we used it to pump fats and oils into ships. Driving across the Oklahoma Panhandle years ago I saw numerous engines on irrigation pumps, they looked like car V-8s set up with governors to run pumps. I've seen Chrysler slant sixes and Ford 300 straight sixes set up as power units. If you can find a power unit it'll more than likely have a governor and clutch/PTO set up in place and a hood and control panel. Many combines, swathers and self propelled balers had car derived engines on them, again you'll get the governor and maybe a pto clutch in the deal. There are belt driven governors out there, again found on industrial power units, agricultural applications using automotive engines and some turf grass equipment, an example that comes to mind early Toro Groundsmasters used a Continental R-839 that was really a Renault car engine, they had a belt drive governor. Some turf grass stuff used VW diesel engines that would be a sweet power unit to score if you could find one, you didn't mention diesel but you don't have ignition or carburetors to mess with and diesel fuel stores better than unleaded gasoline.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.