Posted by tjiniowa on July 05, 2012 at 15:32:50 from (199.120.64.103):
I need to enlarge a 15 ft. diameter pad to fit an 18 ft. bin, the old concrete is 4 years old and in good shape. Looking for recommendations if I can just add on to it at the same level all the way around, digging in a rat guard as well, and drilling in some rerod to the sides and a couple of bands around it. OR should I do that as well as add 4-6 inches on the top of the whole thing and tie it all together. Please don't tell me to remove the old one and start over, I know I don't need to do that, I am just wanting to place a 18ft. bin here to use for wet holding bin, it is in better shape and larger than the 15ft. I placed there used about 4 years ago. Thanks, I have to do all my concrete work myself because nobody good around here will do small jobs like this for me because I am not a big time farmer with deep pockets.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.