Posted by showcrop on July 01, 2012 at 04:55:17 from (75.67.231.80):
In Reply to: Ford 5000 PTO posted by warrenoliver on June 30, 2012 at 21:18:42:
Quoting Removed, click Modern View to see
Warren, I spent a little time looking at the parts diagram on the CNH website. The PTO clutch arrangement is basically the same as on my 9000 and my 8240. The whole clutch assembly rides on the PTO shaft and would spin around it if not for the locating pin that you removed. Upon removal the valve assembly would have rotated CCW a little and when you got the pin back in it most likely went in just above the arm that it is supposed to be in instead of through the hole. With the pin in the wrong place, the most likely problem is that the Hydraulic line that supplies the clutch valve got disrupted and is leaking. With the access plate off as Shaun suggested you can get the valve up to where the locating pin will go where it needs to go, but while it is off, try to check the integrity of the hyd. line going into the bottom of the valve.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.