Posted by Don-Wi on July 29, 2011 at 16:11:43 from (75.241.196.38):
I know that work is hit & miss in lots of areas, but definattly not at my shop. Hardest part is getting the work orders to be released from the office in a good flow.
Been on atleast 45 hours for the last month or so, gonna work Saturday this week, and next week they're calling for 55 hours. Should be a sweet paycheck, if nothing else.
It helps a lot that we got our 2nd crop off last weekend, after only going 3 weeks since 1st crop. We were gonna bale it, but the rain on Friday night changed our plans to chop. Was gummy and fought a few plug ups on the blower, and then finding a bearing bad in our blower so we had to borrow a neighbors spare to finish up. Stayed late on Sunday night to finish chopping it, but we got it done for another month now.
Now I can focus on work again and a larger paycheck. I normally run 2 vertical machining centers, but one has been down for a month already and looks like they may have to replace it as parts appear to be hard to find. Can't say I would mind a new machine one bit...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
