Posted by Montour PA Steve on July 17, 2014 at 08:26:40 from (70.192.134.69):
Our 706D (D282) makes about 25 psi oil pressure when cold and slowly goes down to less than 5 psi (nearly zero) when hot. This motor got a complete overhaul last winter including sleeves, pistons, rings, main bearings, and rod bearings. We replaced standard bearings with standard. The head was also completely gone over. We did not remove the timing cover to replace camshaft bearings. The low oil pressure problem has existed since we got the tractor 15 years ago, and I thought the overhaul would improve things. I verified the pressure using two different gauges - just in case. Then I replaced the oil pump with a remanufactured one and still no change. I"ve since removed the oil filter housing and oil cooler and found no problems or blockage anywhere. What else can I check?? Some may say that if it"s run this long with low oil pressure, keep running it that way, but we found significant wear on the main and rod bearings during overhaul and it doesn"t make me feel very good doing field work looking at a pressure guage reading 0 psi! One final note: At some point in the distant past, this motor became a hybrid with a D236 block and a D282 crankshaft. Everything about it is a D282, except that the block is stamped D236. Thanks for the help!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.