Posted by mkirsch on April 01, 2014 at 04:53:56 from (65.199.189.6):
In Reply to: super a torque posted by farmall4856 on March 31, 2014 at 17:37:30:
I just did the head on my 240, which is basically the same.
There are 9 bolts. A row of 4 along the manifold side, and a row of 5 along the distributor side.
Standing on the distributor side:
1 - 2 - 3 - 4
5 - 6 - 7 - 8 - 9
I started with bolt #7, then #3, then #2, then #6, then #8, then #4, then #1, then #5, then #9, then #4.
Torque spec is 65ft-lbs in the book, but I did some research and several knowledgeable sources have told me the spec was updated to 80ft-lbs. I torqued in 4 stages, snug, 40, 60, and 80.
Right or wrong, that's what I did, and I got away with it so far.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.