Posted by Aaron Halfmann on October 29, 2013 at 11:58:49 from (70.194.3.2):
Posted early about my H having water in the oil. I've had this tractor for about 4 years and use it regularly for lawn mowing, moving fire wood too the house, and many other generally light duty chores. It starts easily on second crank and runs very well. My oil pressure gauge will max out upon start up then slower creep down to about 20-40 psi at full throttle. Use about a quart of oil every 3 months which I mostly think I bad valve guides this thought because of black/bluish and white smoke at start up. So guess my questions I plan on pulling head to see if that is were water is getting into oil and have it gone through. I would like to check cylinder pressure prior to pulling head and would like to know what kinda of pressure I should have. I do know that I don't Want to have one way lower than others. Just looking for something to go by. TIA Aaron
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.