Posted by Jim Naden on October 07, 2012 at 18:16:49 from (12.74.49.161):
In Reply to: 756 shifter posted by flhr62 on October 07, 2012 at 12:57:04:
flhr62 said: (quoted from post at 12:57:04 10/07/12)
redih55 said: (quoted from post at 15:21:48 10/06/12) I had the same problem with my 856--found out the roll pin at the bottom of the forward shifter had broken. Punched it out and put in a new one, forward shifter works like it should now.
Thanks, that was it. What's the trick for getting the pin back in? The way the holes lined up I could not tap the pin back in. I ended up making a new pin by cutting off a drill bit and tapering the end. Now I just have to come up with a way to keep it in. By the way my pin wasn't broke, it just came out.
Instead of a pin, I have used grade 8, 1/4" bolts with a shank long enough to extend almost all the way through the parts, use a lock nut, trim off the excess threads.
This post was edited by Jim Naden at 18:19:46 10/07/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.