Posted by realolman on August 22, 2012 at 15:21:24 from (108.22.71.120):
My 300 u has an uncompleted 12 v conversion. I decided that I think I'm just gonna rewire the whole thing. I took the alternator to the local shop and they put bearings in it and tested it. Its a Delco CS130 and supposed to be able to output ... I don't remember ...80+ amps. Now I know the engine doesn't turn all that fast, but I assume this alternator is a good deal hotter than the 6 v generator.
I took it home and hooked it back up and it didn't work. I ran a wire straight to the battery and it works, so something is wrong in the wiring. The ammeter hasn't worked since I got it and it seems to be "pegged" ...I imagine that's probably where the charging trouble lies.
I think if I installed a voltmeter, I should probably install another fuse. I think the only fuse in the system is in the lights. I think the voltmeter would probably be more useful, and although I am not a correct police (by a long shot) ...I would like to get something that looks like it belongs.
I have been thinking and I believe a volt meter would be more useful anyway... but if I did decide to reinstall an ammeter, would the output of the alternator be enough higher to cook an 'original" type ammeter?
This post was edited by realolman at 15:28:04 08/22/12 3 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.