Posted by John T on August 22, 2012 at 06:23:46 from (216.249.82.117):
In Reply to: alternator posted by morris roessler on August 22, 2012 at 05:55:22:
To prevent alternator feedback from causing the coil to be energized (engine still runs with key off like when wiring a 3 wire GM 10 SI) even when IGN is off, a body can use:
1) A small diode (rectifier) (3 to 5 or more amps and at least 50 PIV will work) wired at correct polarity......
2) Or a small incandescent "idiot light" bulb which serves not one but two functions
3) Or a 10 or so ohm resistor.
I usually just use a resistor cuz you dont have to worry about its polarity,,,,,,,,,cheap n easy to buy and wire in and is durable,,,,,,,provides at least some degree of current limiting protection.
An incandescent idiot light provides some visual charge indication PLUS prevents feedback
Some gents (Bob M I think) even go so far as using an idiot light PLUS a shunt resistor so she still charges even if the light burns out !!!!
So there, "we report you decide" what method you prefer as any will work. Your tractor your choice
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.