Posted by WY JERRY on May 24, 2011 at 17:56:48 from (72.21.73.208):
49 M with magneto, 4-position light switch. Since I've owned it it has had no charging system, lights, anything electrical except the battery and starter (and mag). I bought a 6V generator with a VR that was taken off another guy's tractor when he converted to 12v. The gen / VR combo was working at the time.
I have Bob M's wiring diagram #4, which shows a cut out instead of the regulator. I also have John T's troubleshooting procedure. And I have a post from May 4 11 that is dealing with a very similar situation. Between these resources I have a pretty clear idea of what needs to happen. Thanks to those involved.
Here's my problem: I don't know which terminals on the VR are which! I see no markings on it. The photo shows the terminals numbered. If someone can match up the numbers with what they should be labeled I think I would be all set.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.