Posted by Troy Schubert on January 03, 2011 at 13:48:32 from (63.166.241.80):
The right side roller bearing cup in the differential has some major divots/damage. I've visually inspected the other bearings in the differential and they appear OK. I've convinced myself that I need to replace the bearing cup at a minimum.
Looking for any advice:
1/ should I replace the right side roller bearing AND the cup even though the bearing looks OK?
2/ Only place I can find to order the bearing cup is www.messicks.com. P/N 86500721 for $63.81. Any other ideas where I can order this Timken bearing? The original Timken number for the whole bearing is 3044002R91 and it cross references to a 482/472. All my searching has not produced any US distributor where I can order it.
Best I can tell from the Timken failure analysis pics is that the bearing was exposed to water and corroded. It makes sense because I do have a leak between the differential cage and diff housing, but doesn't make sense because the other bearings appear OK.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.