Posted by Jimb2 on June 12, 2010 at 19:11:01 from (72.38.123.67):
In Reply to: 585 loader hookup posted by MikeinKy on June 12, 2010 at 14:56:28:
Hi you can spend many $$ at CaseIH and by a power beyond plate for the end of the aux remote valves. IF you never use the hydraulic remote outlets then you can connect the IN side of the Joystick valve body to one remote outlet and connect the OUT to the other remote outlet and tie the remote outlet lever back so the remote outlet is open. If Joystick is working in wrong direction, just swap the hydraulic pipes at the remote outlets.
If you require use of the remote outlets at same time as loader then the cheap way to install Joystick control valves is: Removed the aux hydraulic return tube from the aux control valves to the draft control module under the seat. See tube at caseih.com parts for 585 hydraulics page 8-450 item 18 Tube assy Aux Valve return.
After you decide your method of connecting the Joystick valve then post again and I will supply more detailed instructions.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.