Though there may have been components from M&W to fit the pump on the tractor originally (certainly without changing the gen mount) finding those will be near impossible. Two suggestions: Re-design the hydraulic routing to better fit the space. This might involve using new elbows at the pump, or having a steel adapter made to "flatten" the hoses along the pump. The most important elements in this are the use of pressure rated fittings and hoses made up by a hydraulic shop, or if you are set up to do it being careful to have high quality connections at all points. The supply side must be set up with hose rated for suction not pressure. This can use barbed fittings and clamps, but that is not as desirable as made up hose end systems similar to the pressure side. All pressure hoses should be 2500psi working pressure rated (or more).
The generator mount might then work as originally designed. MD mounts will probably work. If not, fabricating them is not difficult. Use 3/8" thick by 1" wide strap to form the bracket, and attach it with tabs and an arm to adjust the belt tension. If the pulley is an adjustable design it can also allow a ridgid location of the gen, taking up belt tension by changing the pully adjustment. Good luck. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.