Regardless if its a 3 terminal Voltage Regulator or the older style Cutout Relay, theres usually ONLY ONE wire on the ammeters SUPPLY terminal and that gets to the hot ungrounded battery feed usually via a wire down to the starter where the big batery cable attaches,,,,,,,,,The ammeters other LOAD terminal wires to the BAT terminal on a Voltage Regulator PLUS feeds hot battery voltage to loads like lights and ignition. IE the gennys output PLUS the loads all wire on the ammeters one terminal opposite the other supply terminal.
If it reads bass ackwards, simply reverse the leads. If its wired right if you turn on lights or ignition when shes not running the meter should swing to - discharge but then when running at RPM if shes charging it will swing to + charge, again, if it does opposite reverse the leads
No it wont damage it, just read bass ackwards
When they are converted from Pos to Neg ground the ammeter leads need reversed, of course
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.