Posted by John T on November 18, 2008 at 07:49:38 from (66.244.97.31):
In Reply to: farmall h wiring posted by t martin on November 18, 2008 at 07:21:01:
AS far as the charging system, the 4 position LHBD was for use with a Cutout Relay while the 3 position OBD was for use with Voltage Regulators.
If a Cutout Relay is used you need to be able to regulate the gennys charge rate and thats done by wiring its FLD post up to the LHBD switch so it gets a dead ground (High charge) or a resisitve ground (Low charge)..
If a Voltgage Regulator is used the gennys FLD post wires to the FLD terminal on the VR so theres no need for any genny to light switch wiring, the VR controls the charge rate i.e. you dont need LOW and HIGH charge light switch, the light switch controls the LIGHTS ONLY NOT LIGHTS PLUS CHARGE
As far as any rear light use and what switch Jim or Bob M can answer better then me I havent owned IHC in yearsssssssssssssss
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.