Posted by boomer22 on June 28, 2008 at 06:41:10 from (199.120.77.167):
I know this has been covered in many different ways. I have searched and read everything i can find but either it won't sink in or i'm not finding what i need.
I'm trying to wire in a 4 position switch and ammeter. i have printed off bobs diagram #3. I seem to be confused about the cutout relay. is it the same as the VR?
Also from the diagram the filed wire is going from the field resistor on the switch to the field post on the gen. As mine is wired now (i have no light switch) field is comming from the VR to the field post on the gen. I have no lights yet so i figured i'd leave them open for now.
Also the ammeter (this is a used switch and ammeter) has 4 wires hooked to the right side post (looking at it from the back side bolts pointing towards you) and the left has one, wondering where all those wires went to?
Thanks in advance for any help
This post was edited by boomer22 at 06:58:14 06/28/08.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.