Posted by Andy Motteberg on May 09, 2008 at 20:54:58 from (4.143.216.45):
Hi all, I have put the no. 30 loader on my 1943 Farmall H. The loader is run off the belly pump. The loader seems to work alright, except it does not go high enough and does not lift much because I need to hook up the large oil resivor. My question is how do I hook up the hoses on the large oil tank to the belly pump? I have no idea where the hoses from the tank should be on the tractor. I looked at Janicholson's hydraulic diagrams, but did not see a diagram on how to hook up a resivor tank to the belly pump. If someone could help me on how to hook up a oil resivor to the belly pump, I'd appreciate it!! This loader came off a 1946 H that my Dad bought on eBay, this loader was run on a M&W live pump before, but now it will run off the belly pump. The way the loader is in the picture is the highest it will lift.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.