The points are eroded by the electrical arc that occurs each time they open, thats why you found a large gap. Might have been better to replace points and condenser, but it sounds like you're happy with the way its running, so they probably have a little life left. It sounds like you must have removed the distributor. When reinstalling one, all you need to do to is get it timed close enough for the engine to start and run, but you really must check the timing at full throttle with a timing light, because the degree of advance at full throttle is the most critical setting. It's been awhile since I've had anything to do with a 340, but I think the flywheel has degree marks. If so, there should be a cover on the side of the clutch housing you can remove and a timing pionter underneath. Get yourself a I&T manual, find out how many degrees it should be advanced at full speed, locate that mark on the flywheel, and mark it with a white marker so it will show up under a timing light (liquid paper pens work great for this).
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.