Posted by Charles Todd on February 10, 2008 at 18:48:07 from (205.242.95.139):
I posted a few days ago with some pictures to determine my wide front mfg. Some noticed that the wishbone was tied into the (bolster?) and bolted to the front at the steering housing. I know nothing of what it is supposed to look like, but it explains why the 4 bolts holding the entire front end to the tractor have broken and stripped over the years. Both times drilled and tapped 1 size up.
I have bought a loader and need to install it. My fear is the weak front axle. Growing up as a kid I remember Dad always telling me to be careful the old Farmall has a weak front axle. Clearly this is a home made front axle mounting aparatus and needs to be braced. But to where?
This looks like a good place.
As well as behind the oil pan on the (bellhousing?).
Can a new Schwartz be purchased from somewhere? Just add some steel to mine? Ideas?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.