We had a thread going on this very topic the other night either here or over on Tractor Talk, but be durned if I can find it now to give you an easy link.
Consensus there was. . . Your best route is to change out the manifold you now have (assuming you have Touch Control hydraulics already) to the manifold that was made for a remote hydraulic circuit. The manifold is the piece (icluding the piping) that runs from the pump to the rear and bolts up on the side of the TC block. The manifold for the remote hydraulics has fittings that let you run two hoses to the rear.
You can gump something together without that manifold, but it'll be gumped up. Don't know how else to say that.
Having the original style controls for the remote-type manifold would be a bonus, but you can make a neat job of mounting after-market controls if you have that manifold.
You might try looking yourself for that thread that I can't seem to find, as it mentioned sources for such things. I know eBay was among them.
I'm thinking it's about time I added the remote to my SuperC, to, but need to tend to a couple other priorities first.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.