Posted by Paul Shuler on August 30, 2007 at 16:02:36 from (170.29.248.3):
There was a discussion a few days ago about gear oil in old Farmalls. It talked about GL-1 through GL-5 90w oil. In my ignorance I didn't even know there was different grades of 90w. This morning I went out to look at the bucket of gear oil I used to top off my H when I changed the pto seal. I Added about two gallons. It said rated GL-5 through GL-3. In the previous discussion it came out that some felt the GL-5 stuff was over kill for old tractors and that it may even be harmful to brass bushings. If this is the case do I need to drain and flush my rearend{on the tractor}. Oil is high now but would be cheaper than a rebuild if it screws something up. Tractor is used 15 to 20 hours a month mowing. All opinions welcomed. Thanks Paul
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.