Farmall & IHC Tractors Discussion Board |
Spliceable Urethane belt.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JayWalt on December 08, 2006 at 02:16:59 from (24.223.138.48):
Was wondering if anyone has ever used this. It is primarily used in converyor systems: http://cgi.ebay.com/Eagle-URETHANE-V-BELTING-Spliceable-A-100-feet_W0QQitemZ7596800674QQihZ017QQcategoryZ1267QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
I was hoping to use it to fix my generator belt on my 300u, as I cant remove the waterpump belt because the setscrew in my waterpump pulley is broken off. I do not plan to use the tractor in the cold weather, so the cold isnt a concern. I'm not sure how it would hold up to the engine conditions. I'm pretty sure that it would work for the generator, as its no more then 1 HP I assume. One concern is the tight radius around the generator. This type is spliced by using a hot peiece of metal between the 2 ends and then its slide out the the 2 ends are "melted" togther. The other type uses a double ended barb, but I've read that they arent too tolerant of tight radiuses such as th generator pulley. I dont need 100ft of it, so if anyone would be interested in purchasing some from me, let me know. I would only charge realistic cost, not looking to make a profit. Thanks for any opinions, Ideas and whatnot. In an ideal world, I would like to pull the radiator, and pull the waterpump off and drill out the setscrew, and retap the pully. I'm not sure I'd be able to separate the 2 pulley halves anyways. The waterpump belt is in like new shape, with the white lettering clearly visible, so that should last several years.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|