Posted by Eastsider on April 11, 2009 at 19:16:51 from (24.111.59.154):
Sorry for the poor picture, but if you look at the upper right corner of the governor, you will see a nut and a threaded insert. Inside this insert, there is a spring that seems to act as a dampening device at high speed rpms. I was putting a governor together for my H engine the other day, and of the four I had to work with, three did not have this feature...the casting was just smooth and no insert at all. Has anyone ever seen this before, and if you have, what is the purpose? I decided to use this one, since it had great weights in it already and the rest of it was in good shape. The other picture is the engine as it sits waiting to be put into action. I am restoring my Grandfather's H, and I have had to use two other parts tractors to get the things I needed....there is still a lot to go. By the way, if you ever re-build a front bolster, there are more than one design internally! Been there today and finished up after combining two into one! Mark
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.