Farmall & IHC Tractors Discussion Board |
Re: still stumped
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on November 04, 2006 at 17:46:27 from (75.19.122.82):
In Reply to: still stumped posted by voager213 on November 04, 2006 at 09:32:13:
I would say that the two bushing on the arms where the gov. spring goes are GONE , so if ya pull the side plat off the gov. and the spring just sorta flops around and the whole look big then they need to be rebushed . Now those bushings have to be made and i always use bronze also they must have a small chamfer on both sides . When i need one rebushed i have a friend that works on clocks and he has this neat littel machine shop in his basement and he makes them up and press fits them . He was having the same problem with his one S/MTA as we call it the old one as he has two and it would not ideal down well on nice sunny afternoon we got into it and i showed him what the problem was and i pulled the govener off and took it apart and we went to work an and hour later it was back on and working like a swiss watch so he now knows how to make them and just how i want them and has done a bunch for me.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|