Farmall & IHC Tractors Discussion Board |
Re: 656 Farmall
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on August 04, 2006 at 09:37:40 from (75.24.34.189):
In Reply to: 656 Farmall posted by MIDNIGHT on August 04, 2006 at 07:41:59:
Like ACE said and i have said ya have to have the special fitting that has the correct thread with THE O/RING and the orface hole and a gauge that will read to 600 lbs . Now more then likely the clutch pack is already toast as they do not take slipage well . And if ya just start tryen to adjust it with out the gauge on it you could posibly BLOW the clutch piston and clutch pac apart. as about 235-265 is about all ya need for lock up pressure . So you maybe ahead of the game if you would just take the tractor in to a dealer and have them fix it . If i was doing it you would have somewhere between 250-325 in it depending on what i found if all it needed was a clutch pac and set it is not a big deal if it needed resealed then it would be the higher price.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|