Farmall & IHC Tractors Discussion Board |
Re: questions?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on August 02, 2006 at 12:47:09 from (75.24.34.189):
In Reply to: questions? posted by FC Andy on August 02, 2006 at 12:36:31:
Well if ya got the maifold apart then that is 99% of the battel , now just clean up the pices and slide it back together and carbon will do the rest for resealing and as far as massuren the width of a plow massure between the beam and that is the width if ya try and amssure the shear then it is something like this a 14 inch bottm the shear will be ABOUT 16 inch long and a 16 inch shear will be ABOUT 18 inch long, like i said ABOUT . A 806 was designed as a 5 bottom tractor when new and would roll along with 5x16's in 4th low stick ahead as i did a lot of plowen with and 806 when they were brand new , but they work real nice with 4x16's as that is what i am pullen with mine i have a set of 710 4X16's that i pull with it and can run high 1st .
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|