Farmall & IHC Tractors Discussion Board |
1066 Third time the charm?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Michael Sheik on February 07, 2006 at 04:40:47 from (199.153.205.246):
Well, had the IH mechanic tear apart the auxiliary control valve yesterday evening. When he did we found that the oring on the actuator tube(on threaded end) had a small piece cut out of it(not completely broke). He checked to make sure the plug, oring and backup washer were seated good in the actuator and they were. Nothing else was found to be wrong except that one oring. I put back on tractor and ran for 10 minutes with no leak noticed. That happened last time too and lasted for 3 hr field work. All I have left is 3 or 4 hours field work so at least maybe I can get through that. A little something he told me that you all might want to know is that when you are unscrewing the actuator out of the spool, utilize screwdriver slot to remove actuator and sleeve holding detent balls as a unit and when you go back do reverse and do not overtighten (that is probably what I did). He did not remove the sleeve from actuator nor did he unscrew the adjusting plug from inside of actuator. He also only hand tightened the hex head cap and told me to only hand tighten sleeve into valve body.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|