Farmall & IHC Tractors Discussion Board |
400 q/h and rpru
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by scotc on January 20, 2006 at 21:17:34 from (65.220.16.62):
I'd like to put a quickhitch on the 400 this spring. I've been thinking, and it seems to me, that the hitch off of a ute, if it will bolt up to the 400, should give me a little extra lift height, due to the ute version having to provide as much lift height with a smaller rear tire.But at the same time I'd like one like on the 300 we had. It had an arm that bolted to the corner of the platform and the cylinder lifted that arm, which connected to another arm and a rocker shaft under the pto to the right side with a arm over there to lift that side and a vertical crank for leveling. I don't know if that type is available for the 400, but I liked it because there was no slop in it. This is probably one of those things I'll never really resolve. A freind and I are going to the ihc club winter convention as it's only about an hour and half away. If that's interesting enough I may throw the narrow front on the SM and talk him into hauling it down to rpru with his 560 puller. And if I can't, I'll just be there wandering around myself.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|