Farmall & IHC Tractors Discussion Board |
706 rebuild 3 questions?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Kelly C on January 07, 2006 at 18:13:19 from (63.171.43.140):
Man am I bushed, been out there wrenchin all day. Got her pretty much tore down.
Of course I broke some bolts :-) Getting the fan,air cleaner and thermostat off was hardest part of the whole job so far. The bolts holding the air cleaner are rounded off so bad cant get a wrench to them at all. Had to cut the fan belt to get to get it off. Here is a burnt valve in the head. What are the symptoms of this condition?
Took the oil pan off. three things I am trying to decide before I continue. #1 ridge ream the cylinders to get the pistons out. Or just try to get them out as is? #2 Should I remove the support bracket for the wide front to gain better access to the bottom of the engine? #3 Buy a puller plate to pull the sleeves or weld a bead along the inside of the sleeve to remove? I have updated my web site for those who like to follow along :-)
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|