Farmall & IHC Tractors Discussion Board |
Re: HELP! M won't start after installing voltage r
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by John T on November 28, 2005 at 06:01:11 from (66.244.90.98):
In Reply to: HELP! M won't start after installing voltage reg. posted by Granger on November 27, 2005 at 11:11:24:
Granger, I dont know from sitting here if shes not starting cuz of a drained battery or a starter or starter switch or wiring/connection problem. HOWEVER that dying n failure to re crank makes me wonder how good n how much charged the battery actualy is and makes me suspect a short somewhere thats discharging the battery.............. Soooooooooo insure the battery is good n capable of accepting a charge (maybe have a shop load test it) and if so give the battery a good charge, then see if she will crank and we will go from theres maybe looking for a short thats discharging the battery. Have the lights on when you try n crank her n see if they dim down badly when you try n crank her????? If so I suspect a stareter problem. If they like dont change much when trying to crank, then I suspect a bad connection or a bad starter switch. If in doubt in the meantime I would remove, clean n wire brush n reattach each n every battery n starter switch n starter n ground cable conneciton then try her after a good battery charge ???????????? Kinda acts like the batery is simply dead if she died n wont re crank and a short may have caused that even if the genny and new VR are both fine. Lemme know John T
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|