Farmall & IHC Tractors Discussion Board |
Re: 656 remote unlatching pressure
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by K.B.-826 on November 01, 2005 at 20:02:09 from (66.188.223.190):
In Reply to: 656 remote unlatching pressure posted by FormerlyPaMike on November 01, 2005 at 14:18:37:
Mike, this is much easier to do with a Flow-Rater, since those have a valve you can turn in to gradually increase the pressure until your lever unlatches. You'll have a hard time doing this with a guage plugged into a coupler, since it will probably register max pressure the second you latch the lever back. I'm sure you don't want blow $2000 on a Flow-Rater just to make this one little adjustment, so do like Allan suggests. That's how I do it at home. The important thing is that the lever unlatches before max pressure is reached, but does not unlatch before the cylinder on the implement you are using reaches the end of it's travel in the direction where it works the hardest, such as raising a loader with a fully loaded bucket.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|