Farmall & IHC Tractors Discussion Board |
F-130 Hydraulic Pump leak into engine oil how do I
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jeff Farm on September 16, 2005 at 07:57:28 from (70.89.62.134):
Scenerio: This is my father in law's Farmall 130, he is ill so I know little about this tractor. I have never worked on an old tractor before and I thought it would be fun to get it up and running. All I know is the hyraulics haven't worked for years (maybe as long as 10) and the tractor hasn't been started in 3 or 4 years. New battery and the tractor started right up. Figured I'd check all the fluids and start changing them since I know my father in law hasn't been maintaining it and god only knows how long its been. Oil level was high and very black, didnt think much of it other then it needed to be changed and figure he had added to much oil at some point. Then I checked the hydraulic fluid and quickly figured out why the hydraulics didn't work, it was bone dry. I added one gallon of hy-tran which filled it, used the hydraulics alittle and then checked the fluid level again. Now it is low and could use maybe 2 quarts. It is only supposed to hold 8 1/4 pints. Now I understand why the oil level is so high! Questions: Hydr pump needs new seals, correct? Is it easy to replace the seals, and what else will I need (ie any gaskets)? What is the proceedure? How long will it take? How bad is it for the engine to have been running with hydraulic fluid mixed in the oil as this was probably occuring for years? Can I still run it if I drain the hydraulic system and change the oil and only use it for pulling until I have a chance to fix the seals? Anything else I need to know? Sorry for the long post, but I'm a newbie.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|