Farmall & IHC Tractors Discussion Board |
Re: Help with part
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Sheepdog on August 21, 2005 at 19:00:59 from (67.0.3.164):
In Reply to: Help with part posted by Bustedupcowgirl on August 21, 2005 at 12:07:02:
I don't have part # for the 756, but a 1066 one is #529 910R93. It's a Hyd Control Valve. The only difference is the little piston in the center of the valve is better in a 1066. Either valve will work on either tractor. Any junk yard will have these, but pick one with a chrome shaft that has no pits in it. The three bolts that hold this together has to be torqued to a certain ft lbs. (which I did'nt look up, but can). Have someone, if you can't, take the new one apart and replace the o-ring around this piston and other o-rings also. Once got a valve from a yard and the o-rings they sent to go bettween the valve and end plate were to big, use IHC stuff.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|