Farmall & IHC Tractors Discussion Board |
Allan in NE, Hugh, and other Cyclo owners
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by P Backus on May 19, 2005 at 07:05:22 from (69.128.32.184):
I am making markers for my grain drill using double acting hydraulic cylinders. I got the hydraulic shuttle valve ( switch) off of a 400 Cyclo. I assumed that it was a simple shuttle valve directing hyd flow to one side or the other. However when checking it more, I find that it works differently than that. It has three check valves that seem to allow pressure from the "in" port to flow to both "out" ports, but only allows it to flow back from one of the "outs"- whichever side the switch is moved to. Also there is what I thought was a check valve in the "in" port, but I suspect it may be a flow restrictor to limit how fast the markers are lifted up. My question is this: am I correct on the function of this valve? Is there a way to regulate the restrictor to change the flow rate? Is that really a restrictor? Will this thing work like I want it to if I install it in the "marker lift" side of the hydraulics? Remember, I have pressure down on these cylinders too. I'd hate to spend all the time to put this together and have to pull it apart again. Thanks, Paul
Follow Ups:
- Re: Allan in NE, Hugh, and other Cyclo owners ohjeffoh 05:07:39 05/20/05
(0)
- Re: Allan in NE, Hugh, and other Cyclo owners CNKS 18:06:19 05/19/05
(1)
- Re: Allan in NE, Hugh, and other Cyclo owners David A. Hodson 17:46:46 05/19/05
(0)
- Re: Allan in NE, Hugh, and other Cyclo owners Allan in NE 15:02:04 05/19/05
(3)
- Re: Allan in NE, Hugh, and other Cyclo owners captaink 09:13:54 05/19/05
(0)
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|