Farmall & IHC Tractors Discussion Board |
Farmall 460 Gas: No oil pressure
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe S. on December 21, 2004 at 04:35:00 from (64.12.117.13):
Recently purchased 59 Farmall 460 Gas with 5600 Hrs on Tach from a dealer. Head mechanic said tractor was put on dyno and was turning out approx. 56 HP. The tractor starts fine and there is no blue smoke coming from the exhaust. After receiving tractor, I changed the engine oil and filter. The waste oil appeared to be a heavier grade than 30W and was free from any contaminates (anti-freeze). I replaced with Rotella T 20W for easier starting on cold mornings. Last week the tractor was used and the oil pressure gage seemed to be working. It would fluctuate with engine rpm"s and sometimes max. out. Yesterday, we started the tractor and we have no oil pressure. Is the oil pressure gage malfunctioning or is this a sign of something more serious? Is there any way of checking the oil pressure gage without purchasing another gage? I would appreciate any suggestions.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|