Farmall & IHC Tractors Discussion Board |
Allen in NE 966
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by captiank on November 17, 2004 at 06:41:33 from (66.115.214.56):
Morning Allen, On that 966 you are having fatherly instincts about (pacing and waiting), have you had a chance to verify for your self that the engine is locked? If I remember correctly, there is an access plate about 2 X 4 inches on either the left or right hand side (can’t remember) of the flywheel housing that you can open and stick a pry bar into and turn on the ring gear to find out if it is locked. One more thing, I don’t know if keeping it stock is a concern to you, but I stroked my 966 and put the 436 crank and pistons in mine to get more low-end torque. Best thing I ever did really made a low end puller out of it! You just might want to consider this if you are doing an engine swap anyway. I have the Blue Ribbon shop manual for that series, so if you need something holler. Good luck, and let us know when the baby arives :>).
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|