Farmall & IHC Tractors Discussion Board |
Re: Super A head gasket, which one to buy
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Stan(VA). on August 02, 2004 at 05:34:31 from (208.59.156.134):
In Reply to: Re: Super A head gasket, which one to buy posted by bryan meade on August 01, 2004 at 19:05:45:
Bryan, Depending on which engine block and what sleeve kit is in there at the moment it could be 113, 123 or 133 inches. But for the sake of ordering the head gasket it's a C113. Like Justin said, the difference is the water pump (C113's came w/o, C123's came with). Either gasket will fit, but the C113 (w/o pump) has larger water jacket openings to allow the thermosiphon system to work; the C123 (with pump) has smaller water jacket openings to restrict flow. Danger is obviously putting a C123 gasket on a motor w/o the pump, then trying to work it hard. Either way, if you have it apart try to flush as much sediment as poss out from around the sleeves. Stan(VA).
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|