Farmall & IHC Tractors Discussion Board |
Re: H distributor plate marks - possibly for Dave
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ChadS on July 08, 2004 at 09:53:50 from (66.228.96.200):
In Reply to: H distributor plate marks - possibly for Dave WV posted by Dave in CT on July 08, 2004 at 09:40:48:
I have drilled the hole out a bit larger to change the amount of advance the mechanism outputs. Usually, when you have the rotor on, you should be able to turn the rotor to activate the mechanical advance, should turn maybe 1/4 to a half inch of movement on average. Is it a vertical distirbutor, or a horizontal distibutor, delco, or IH?? I have several of both apart,, all off gas models, H and M. Another way to measure the plate is to use a set of calipers to measure the hole sizes, smaller, means less advance, larger, more advance. Maybe drill the one you have to match the one you need??? ChadS
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|