Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Let's get the facts straight about str
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by riverbend on May 02, 2004 at 06:49:55 from (208.160.34.129):
In Reply to: Re: Re: Let's get the facts straight about straigh posted by Farmallkid on May 02, 2004 at 05:54:39:
The dyno will be a lot easier to use than the disk. If dyno time is inexpensive, try a run with the stock set up. You might have to adjust the main jet with the tractor under a load to get the max. power reading. Then try re-setting it with the straight pipe and see what you can get. On some motors, if you can get the length of the pipe right, it will act as a resonator and help draw more charge into the cylinder, but that could be a lot of trial and error. There is a book on tuning intakes and exhausts for best performance, it could have been by Carrol Shelby or Philip Irving. They have a formula for calculating the length of the pipe.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|