|
Farmall & IHC Tractors Discussion Board |
Super M questions
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John (AZ) on March 01, 2004 at 12:44:35 from (205.188.209.82):
I bought a super M at an auction this weekend andthe grill was off the tractor, but it came with one. I went to put it on today and found that the grill is too short to fit over the radiator. Did the super M have a different grill, radiator, and hood than an M?
I bought this as an M with a stuck engine, found out today that the engine wasn't stuck, it had problems with the bearing guide that wouldn't let the engine turn over.
the serial # tag is missing and the tractor has disc brakes, the casting codes are late 1952 and a few with early 1953 (X and Y)so I figure it is a 1953 super M.
Did the engine # match the tractor serial # like it does on my H?
also I need to remove the front shaft to replace the throwout bearing and guide. What is the trick to remove this shaft without splitting the tractor? I have the flex coupling out and the shaft won't slide back far enough to clear the clutch plate.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
