Farmall & IHC Tractors Discussion Board |
Farmall C, Blown head gasket and coolant problem
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Greg Ziegler on December 17, 2003 at 08:31:30 from (67.73.163.29):
I recently acquired a farmall C and it blew a head gasket. It started puffing exhaust out the side between the block and the head. Before this however, when I changed the oil for the first time I noticed coolant in the engine oil.I started to drain the coolant but no coolant would come out. I only can get a little oily sludge on the end of a wire I stuck up the drain tube in attemping to unplug it. I took off the head anyway and after I cleaned up my mess I noticed a break in the gasket around one of the head bolts. I see no way that coolant could get into the oil with where this break was. I have two main questions. What is the best way to deal with a sludge plugged coolant system,and what is the most important things to do to prep the head, and all components to put it all back together.I never did this before and also do not know what other problems could exhist that could allow coolant into the oil. The tractor still ran great when I decided it should not be ran any longer. Someone's help would sure be great! Thanks, Greg Ziegler
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|