Farmall & IHC Tractors Discussion Board |
Re: Re: Re: My goal is to restore my H to better t
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CNKS on December 01, 2003 at 07:34:04 from (207.178.96.212):
In Reply to: Re: Re: My goal is to restore my H to better than posted by Richard Fazio on December 01, 2003 at 05:55:59:
$212 to get a new brake shaft including slots for keys, etc, bushings for two brake pedals (I believe both the pedals and the bushings were machined, or perhaps they machined the pedals to fit the bushings, I don't know). Plus I had the worn place in the upper steering shaft built up, (included in the $212). I would guess that each of these items separately would cost about $75, it adds up. I got a NOS cast bearing for the steering shaft (the part that sits on top of the steering post that the shaft goes thru from justin (Webers Tractor Works for $25.50 including shipping). I have other pins, etc that need replacing, as you mentioned. You can use larger pins, problem is the hole that they go thru is not round. If they aren't too bad I would leave them alone, or just find something that fits a little better.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|