Farmall & IHC Tractors Discussion Board |
Re: What size IH loader for International 240
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Stan(VA). on October 30, 2003 at 05:09:39 from (208.59.156.101):
In Reply to: What size IH loader for International 240 posted by Jerry Deubner on October 29, 2003 at 19:33:57:
IH loaders of that period would be the 1701 or 2001 series, but be aware that you don't just look for a 2001 loader. They are all called by the same series but you ordered the frame specific to your tractor. The 2001 was available for everything and came with a different set of front brackets and a different weldment (and different length) on the lower frame that attached to the rear axle housings. So you can find a 2001 on a 240 or 404 and on a 656, but they won't interchange without help from your welder ;) No, the Super C fasthitch will interchange with a 200, the 230 and 240 I belive will interchange, but since you are working with a utility I would guess that there are some unique parts on the utility models to alter the working range of the hitch compared to a row crop 240. Stan(VA).
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|