Farmall & IHC Tractors Discussion Board |
Re: Re: VOLTAGE CUT OUT
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by K-Mo on August 13, 2003 at 04:59:42 from (65.169.189.2):
In Reply to: Re: VOLTAGE CUT OUT posted by Bill Smith on August 12, 2003 at 15:42:47:
Bill gave an excellent discription of the operation of the cutout system. If your question is directed for troubleshooting, I will add my 2-cents. The cutout is a relay. After the tractor starts, the contacts close and connect the generator to the battery. When the tractor is shut off, it opens. Obviously if it doesn't close, it won't charge and if it sticks closed it will discharge the battery. The light switch controls the charge rate by controlling the generator field current. Grounding the field windings will produce maximum charge. This is why Bill mentioned the importance of grounding the instrument box. The light switch connects the generator field windings through a resistor to ground for "L" charge and directly to ground for "H" charge. A voltage regulator has a set of "cutout" contacts and a second set of contacts to automatically control the generator field current (charge rate). K-Mo
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|