Farmall & IHC Tractors Discussion Board |
12V conversion problem/question
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by LanceM on February 20, 2003 at 16:20:59 from (216.241.128.86):
Hi, Converted my A to 12V using the directions on this site, very good directions I might add, anyway with the switch off the altenator is still drawing around 300ma, something I found out after the A sat for a couple of weeks with out running and when I needed it the battery was dead. The question is do I have a bad alt? and I'm thinking of fixing the problem by switching the wire that goes to term 1 so in the off position it is open also like term 2. Would there be a problem with doing this? Otherwise it charges great and has worked out to be a very inexpensive conversion for me, just what I needed right now on my work tractor. Looking forward to some answers/opinions, Lance
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|